Clik here to view.
Re: The source parameters are invalid for sv2i file
Edit the sv2i file in the source location. You are calling missing partitions. Regards.
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
> How many uplinks have you added?> If more than 2, have you configured LAG? (Etherchannel...etc)I've reduced number of uplinks to 1. But, why do I need to configureLAG (Link Aggregation Group)...
View ArticleClik here to view.
Re: Error converting Symantec BESR 8.5 with Converter 5.0.1
Edit the sv2i file in the source location. You are calling missing partitions. BESR 8.5 works w/ Converter 5.1. Regards.
View ArticleRe: DNS/ping/traceroute problems on mutiple UNIX guests
I think you are right, I see lots of ARP traffic on the failing ones and then :# ip -s neigh show10.227.145.1 dev eth0 ref 2 used 375/487/373 FAILED On the good ones see either a couple of ARP packets...
View ArticleNot seeing VDP plugin on web client
Hi All,I have a vSphere 5.1 environment. I installed VDP Advanced, went through the configuration successfully, but there's no VDP option on my web client. The registration with vCenter said it was...
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
BTW, I am using vCenter server 5.1.
View ArticleRe: Total Vm count shows as Zero(0) in Vcloud Director.
I recommend working through the evaluation guide. It'll give you a decent understanding of vCloud Director from installation through to creating a vApp (and VMs)....
View ArticleRe: VM gets rebooted when vmotioned to this Host
Can you please attach the entire vmware.log file?
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
No, you don't have to configure LAG.If LAG is configured, then the portgroup's load balancing should be configured to Route based on IP hash, that's why I asked. You should not use a gateway for...
View ArticleRe: Recover Snapshoted VMDK file
Hey Man! That was great and it did the trick! Great!!! Really i don't want to bother you anymore but I've got some questions: 1 - what do think caused the problem in the first place? 2 - what did i do...
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
What I am trying to accomplish is to set up vCSHB in WAN environment:I have two ESXi hosts in two different subnets (172.x.x.x and 10.226.x.x). I have the primary and secondary (both are virtual...
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
So the VLAN10 is spanned across two data centres, right?Simply, can you ping 192.168.1.101 from 192.168.1.100? I meant that as long as the Primary can reach Secondary on Layer 2, it should work.
View ArticleBreak VDP on first run by filling it up
Hello - We're really trying to make VDP work, but this is our 3rd attempt and it still seems to lack some key (basic) management functionality. Here's the scenario: Create a backup jobBackup job...
View ArticleRe: Failing to navigate to plugin registration page after deploying vApp
Thanks Chris. Trying with SSL just results in an error about the packet being invalid/too large -- standard browser error message when you try to connect via SSL on a non-SSL enabled port. The error...
View ArticleRe: Failing to navigate to plugin registration page after deploying vApp
FYI adding a host record to the DNS server for the IP assigned to the management server didn't help. Full error is: HTTP Status 404 - /register-plugintype Status...
View Article[JIRA] (HHQ-5914) Reduce logging messages from
Edward Gonzales created HHQ-5914:- Summary: Reduce logging messages from Key: HHQ-5914 URL: https://jira.hyperic.com/browse/HHQ-5914 Project:...
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
The two esxi hosts are managed by the same vCenter server and the same vDC but they are in two different physical locations (i.e. two different physical data centers). Yes, VLAN 10 is spanned across...
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
Then it's quite strange, it should work. Have you configured VLAN10 on the dvSwitch port group?Right click on the portgroupClick Edit SettingsClick VLANEnsure VLAN 10 is assigned
View ArticleRe: how to set up vmware channel between primary and secondary vCenter...
In this case, if I use a non-private IP with default gateway and DNS (on both primary and secondary) for Channel network, that should work, right?That means, Channel IPs on primary and secondary are...
View ArticleMove VMs serially
Hi Community, How can I get all the VMs in a datastore and then storage vMotion them, one at a time, to a different datastore? Here's what I tried, but it kicked off 8 svMotions at once- not what I...
View Article